The Ice Deluxe Discovery Package is everything you need to get started in ice skating. It is designed as an introductory package that pairs EDEA’s Charme blade and Overture boot for best results right out of the box.
Ice Discovery Deluxe
$389.00
Description
boots
OverviewMore InfoOvertureComplete OutfitsCustom Shaping
Overview
Boot: EDEA Overture (Ivory or Black)
Blade: EDEA Charme or JW Galaxy
Mount: Custom Skates US Mounting
- These Packages ARE the Packages, No CUSTOMER Substitutions.
- Skates US may substitute products of equal or higher value at no additional charge.
- Packages are Custom Mounted and Assembled after the order is placed. Please allow for this time.
- Be SURE of your SIZE before ordering!
- Please note that Packages, once MOUNTED, are considered final and are not returnable.
- Choice of Edea Charme or JW Galaxy blade determined by inventory.
Please reference the Chart for blade and laces sizes.
Performance
Lightweight
Our boots are designed with lightness in mind making them more responsive. The lightness helps the developing skater with their feel on the ice and thus helps improve performance.
Control and Stability
The unique insole made with fiberglass and nylon allows more power transmission and increase the stability.
It also allows for the thickness of the sole to be reduced thus lowering the center of gravity and giving the skater even greater control and stability
The unique heel design adds further stability to the boot. The curve on the heel increases weight distribution, allowing the heel to be in contact with over half the insole giving the skater a sense of oneness with the ice.
Lacing
Uses the same lacing system as the top models allowing for greater accuracy and feel in lacing.
Overture also has EDEA’s patented hooks and hook position meaning the laces can hold the boots without the need to strangle the leg. A lace puller will make getting on the ice quicker and help keep the boots pristine by making unlacing easier so the tongue can sit properly when the boots are not in use.Comfort
Wiggle Room
With the lower profile of the design because of the thin sole we’ve added an extra couple of millimeters of room for the toes for added comfort. Because of the thinner sole our boots have a lower profile. This means we’ve been able to add an extra couple of millimeters of room for the toes for added comfort while retaining our lower profile.
Padded
The Overture is padded with our top of the range microfiber fabric offering comfort and support. There is additional padding at the ankle for comfort and to hold the heel in place more firmly giving a better foot position.
Anatomical
All EDEA skates are designed around the foot with curves and strength to hold the heel in place, to support the foot and give the best fit and maximum comfort. The Overture is more shaped and stiffer ensuring the heel sits more firmly in its pocket giving increased comfort and better control.
Tongue
The tongue is key in any boot. In the Overture the tongue is stronger than the Motivo model, giving the increased support required by skaters at this level. Its anatomical shape helps the leg bend in jumps while additional padding increases the comfort.Easy Care
Waterproof Sole
Our high-tech soles are made with ultra modern material making them both light and waterproof. Just what skaters need.
Latest Technology for Blade Mounting
All our models use a special double helix screw fixed through predrilled holes to fix the blades. They are designed to hold the blades more firmly and for longer than old methods making skating safer and more fun.
Designed and Made in Italy
Everything at EDEA is done at our factory in a little village at the foot of the Alps. This means we can control design, quality and production. You buy our boots knowing they’ve been cared for from the drawing board until they are placed in the box to be sent to the shops.
The EDEA Skates OVERTURE as with all EDEA Skates, represents a great advancement in Skate Technology and in turn, in the Skating itself. The EDEA OVERTURE is the High Quality Preliminary and Beginning Competition Level Skating Boot for ICE FreeStyle. The Light Mid Stiff Construction features Beautiful Leather finish outside and perforated MicroFibre Lining. The EDEA OVERTURE is made with Revolutionary NEW Ultra Lightweight Materials, which means the OVERTURE is about 25% to 45% lighter than comparable traditional "light" Skating Boots. Available from SkatesUS.com, the OVERTURE is designed for High Performance Preliminary and Beginning Competition Level Ice Skaters. and for Skaters working on and performing Single Jumps and Axels. These are Beautiful and Comfortable Italian Skates which are available from SkatesUS.com or through your Local Dealer or Pro Shop.
The MicroPerforated MicroFibre Lining is long lasting and ventilates the perspiration quickly. The Anatomically Shaped Memory Foam Padding and Formed fit of the boot is shaped by the Thermoformable Structure and provides the best in foot contact and control while giving the movement range to allow Great Performances. Other features are the Rounded Heel base Shape which more evenly distributes the weight and adds torsional stability, the Full Wrapped Padding, the Shaped Extra Padded Tongue, and the Sewn in strong forged long Hooks. The unique EDEA Footbed is torsionally rigid but with just a bit of vertical compression, that creates a lower center of gravity in the Skate, creating a lower displacement which greatly increases stability and control. The Footbed and bottom cover will not absorb moisture and WILL Securely hold the special EDEA screws, mounting the Ice Blades. For a very detailed Technology White Paper on the differences between EDEA Skates and traditional Leather Skates, please take a little time and read "Why EDEA Skates are so Special" from the Learning Center of SkatesUS.com.
In most cases the Break-In period is just a few hours, not days, weeks, or Months, but the most important Features are how LIGHT and COMFORTABLE the EDEA OVERTURE is!
Blade Sizing is very consistent for each size and between models, please use the Sizing Chart. When Mounting EDEA Skates , please follow the correct Blade Mounting procedures for all EDEA Skates . The Sizing and Mounting information is in the Learning Center on SkatesUS.com. When properly mounted utilizing the EDEA screws, no additional water proofing of the Skates should be necessary.
EDEA Skates fit a great majority of Skaters (because of the newly designed shoe lasts), right out of the box, but some have need of special accommodations to give that perfect fit. EDEA Skates ALL have a Thermoformable Structure which allows manipulation of the boot to give the perfect Custom fit without the Custom price . EDEA Skates use a special Memory Foam (like on your mattress) and DO NOT use gel packs or standard foam that are heated in an oven, then the foot inserted to shape the inside padding of the boot only, this method allows change and movement of the old style padding over time, which is not a good thing. EDEA Skates DO use very high tech materials (similar to a carbon fiber or Kevlar material) which can be shaped using Heat Guns and Special Shoe Lasts, in very specific locations or general widening or narrowing of the Skating Boot. This "Shaping" is actually changing the Structural Shape of the Skate. Once the boot is "Shaped", it will stay in that shape, until the "Shaping" process is changed again. SkatesUS.com provides this very special Custom Fitting service.
Complete EDEA Skate Outfits
SkatesUS.com is providing the opportunity to have a completed EDEA Skate Outfit including the top Ice Blades appropriately used at this level. All of these Custom High Level EDEA Skate Outfits will take about one week, as not all of the Blades are kept in stock. It is highly recommended to use this time make sure that the fit of the EDEA Skate is proper prior to any Mounting of the Blade or "Shaping" of the Boot.
When the EDEA Skate Outfit is paid for, SkatesUS.com will ship the EDEA Skates to verify the correct size and then we will cover the cost of the return shipping after trying on the EDEA Skates prior to mounting the Blades and complete the very high level, high performance EDEA Skate Outfit. For more details on this service see the SkatesUS.com Boot Sizing Policy (which is only valid in the United States). Once the Blade is Mounted or the Boot is "Shaped," the Skates are no longer considered New and CANNOT be Returned. All International orders are final, once paid for and shipped.
The EDEA Skate Complete Outfit is only returnable if the items are in new, unused condition, meaning they have not been shaped or mounted prior to return. We highly recommend confirming correct size before ordering the items to be mounted. Please refer to the SkatesUS.com Boot Sizing Policy listed under our Terms & Conditions of site for more information.
Custom Shaping Services
SkatesUS.com will help with any Custom Shaping Services, as needed. There may be labor charges for the Custom Shaping Services. Some of our Dealers are also trained in the Shaping process and can do an excellent job locally.
Remember with EDEA Skates, the Carbon Fibre type material is not like leather and will not just change shape on its own. If something pressures, it will always pressure, until it is adjusted and then once the Skate is adjusted, it will not pressure and will stay that way unless it is changed again. When we are "Shaping" the Skate, we are "Shaping" the shell or structure of the Skate. Once it hardens into the new shape, it will stay that way until changed again.
The best way for us to work on the Skates, is of course to have the Skater's feet to put into the Skates and find out where the pressure points are.
If that is not possible, please trace the foot on a piece of paper and mail (yes, snail mail) or put good measurements on the drawings in mm or inches. When a drawing is scanned or faxed, it is scaled and makes a good reference, but is not accurate for measurements. The second part of this is to take some digital pictures of the feet and E-Mail them to OrderDesk@SkatesUS.com and to Info@SkatesUS.com. Pictures will help us to visualize the issues, but the drawings with measurements are essential. Please do not put your feet in the Boots and then heat them. This process will be too hot for your feet.
Related products
-
EDEA Skate Laces
$8.00 -
EDEA Trolley/Backpack Jacquard
$119.00