The Ice Discovery Package is everything you need to get started in ice skating. It is designed as an introductory package that pairs EDEA’s Balancé blade and Motivo boot for best results right out of the box.
Ice Discovery Introduction
Boot: EDEA Motivo (Ivory or Black)
Blade: EDEA Balancé
Mount: Custom Skates US Mounting
- These Packages ARE the Packages, No CUSTOMER Substitutions.
- Skates US may substitute products of equal or higher value at no additional charge.
- Packages are Custom Mounted and Assembled after the order is placed. Please allow for this time.
- Be SURE of your SIZE before ordering!
- Please note that Packages, once MOUNTED, are considered final and are not returnable.
Euro, American Men, and American Ladies are meant as a reference ONLY, Please make Tracings and Measure the Tracings to help with EDEA
Motivo Tech Specs
The EDEA MOTIVO is a High Quality way for the for Serious Beginners and Adult Skaters that prefer a mid stiff construction Skate to have the support and control that ALL EDEA Skates offer, but at a very good price point for the Beginning Amateur Level Skating Boot. The Light Mid Stiff Construction features Beautiful Leather finish outside and Padded MicroFibre Lining. The EDEA MOTIVO is made with Revolutionary NEW Ultra Lightweight Materials, which means the MOTIVO is about 25% to 45% lighter than comparable Skating Boots and is available from SkatesUS.com. EDEA Skates are Beautiful Italian Skates, even at this smaller price point.
The MicroFibre Lining ventilates the perspiration quickly. The Anatomically Shaped Foam Padding and Formed fit of the boot is shaped by the Thermoformable Structure and provides the best in foot contact and control while giving the movement range to allow Great Learning and Performances. Other features are the Rounded Heel base Shape which more evenly distributes the weight and adds torsional stability, the Full Wrapped Padding of the collar of the Skate for wonderful comfort, and the Shaped Padded Tongue.
The unique EDEA Footbed is torsionally rigid but with just a bit of vertical compression, that creates a lower center of gravity in the Skate, creating a lower displacement which greatly increases stability and control. The Footbed and bottom cover will not absorb moisture and WILL Securely hold the special EDEA screws, used to mount the Ice Blades. For a very detailed Technology White Paper on the differences between EDEA Skates and traditional Leather Skates, please take a little time and read “Why EDEA Skates are so Special“ from the Learning Center of SkatesUS.com.
In most cases the Break-In period is just a few hours, not days, weeks, or Months, but the most important Features are how LIGHT and COMFORTABLE the EDEA MOTIVO is!
EDEA Skates fit a great majority of Skaters (because of the newly designed shoe lasts), right out of the box, but some have need of special accommodations to give that perfect fit. EDEA Skates ALL have a Thermoformable Structure which allows manipulation of the boot to give the perfect Custom fit without the Custom price . EDEA Skates use a special Memory Foam and DO NOT use gel packs or standard foam that are heated in an oven, then the foot inserted to shape the inside padding of the boot only, this method allows change and movement of the old style padding over time, which is not a good thing. EDEA Skates DO use very high tech materials (similar to a carbon fiber or Kevlar material) which can be shaped using Heat Guns and Special Shoe Lasts, in very specific locations or general widening or narrowing of the Skating Boot. This “Shaping” is actually changing the Structural Shape of the Skate. Once the boot is “Shaped”, it will stay in that shape, until the “Shaping” process is changed again. SkatesUS.com provides this very special Custom Fitting service.
Complete EDEA Skate Outfits
SkatesUS.com is providing the opportunity to have a completed EDEA Skate Outfit including the top Ice Blades appropriately used at this level. All of these Custom High Level EDEA Skate Outfits will take about one week, as not all of the Blades are kept in stock. It is highly recommended to use this time make sure that the fit of the EDEA Skate is proper prior to any Mounting of the Blade or “Shaping” of the Boot.
When the EDEA Skate Outfit is paid for, SkatesUS.com will ship the EDEA Skates to verify the correct size and then we will cover the cost of the return shipping after trying on the EDEA Skates prior to mounting the Blades and complete the very high level, high performance EDEA Skate Outfit. For more details on this service see the SkatesUS.com Boot Sizing Policy (which is only valid in the United States). Once the Blade is Mounted or the Boot is “Shaped,” the Skates are no longer considered New and CANNOT be Returned. All International orders are final, once paid for and shipped.
The EDEA Skate Complete Outfit is only returnable if the items are in new, unused condition, meaning they have not been shaped or mounted prior to return. We highly recommend confirming correct size before ordering the items to be mounted. Please refer to the SkatesUS.com Boot Sizing Policy listed under our Terms & Conditions of site for more information.
Custom Shaping Services
SkatesUS.com will help with any Custom Shaping Services, as needed. There may be labor charges for the Custom Shaping Services. Some of our Dealers are also trained in the Shaping process and can do an excellent job locally.
Remember with EDEA Skates, the Carbon Fibre type material is not like leather and will not just change shape on its own. If something pressures, it will always pressure, until it is adjusted and then once the Skate is adjusted, it will not pressure and will stay that way unless it is changed again. When we are “Shaping” the Skate, we are “Shaping” the shell or structure of the Skate. Once it hardens into the new shape, it will stay that way until changed again.
The best way for us to work on the Skates, is of course to have the Skater’s feet to put into the Skates and find out where the pressure points are.
If that is not possible, please trace the foot on a piece of paper and mail (yes, snail mail) or put good measurements on the drawings in mm or inches. When a drawing is scanned or faxed, it is scaled and makes a good reference, but is not accurate for measurements. The second part of this is to take some digital pictures of the feet and E-Mail them to OrderDesk@SkatesUS.com and to Info@SkatesUS.com. Pictures will help us to visualize the issues, but the drawings with measurements are essential. Please do not put your feet in the Boots and then heat them. This process will be too hot for your feet.