Roll-Line Carbon J ABEC 5 – 7mm Bearings

$55.00

Figure Dance FreeStyle
Derby Raiting Recreational Jam
Rhythm Quad Hockey Quad

Description

Roll-Line Carbon J ABEC 5 – 7mm Bearings
Type:   Custom Roll-Line
Axle Center Bore:    7mm = STCUPCR
Outside Diameter:    22mm (the same for all Roller Skate Bearings)
Number of Balls:    Precision 7 Ball
Be sure you identify which size Axles you have and which
size (7mm or 8mm) Bearings are needed.
Special Features:   Carbon Impregnated Ball Crown Cage Ring
ABEC Rating:   ABEC 5
One (1) Set=   16 Bearings

The Roll-Line Carbon J ABEC 5 Bearings are specifically made for very High Level Competitive Roller Skating. The Carbon J Bearings are Free Rolling with minimal Radial Play which promotes and very evenly distributes the load across the 7 balls for optimal Roll and a good amount of Axial Play or Thrust, which is the side movement of the inner race in relation to the outer race. This movement is very important because when Skaters push, we always put side load on the skate to get power in the push or stroke. If the Bearing does not allow for this, it will bind and LOOSE operating speed or ROLL. These provisions in the Race Curvature and Contact Angle allow the Roll-Line Carbon J Bearings to ROLL freely.

The Roll-Line Carbon J ABEC 5 Bearings is ONLY available for Skates with 7mm Axles.

No matter what type or your level of Skating, GREAT Bearings can only help!

For more information on Bearings and their care, please check out the Bearing Information section of the Learning Center at SkatesUS.com .