The Roller Deluxe Discovery package combines EDEA’s Rondò boot with Roll-Line’s Variant M frame, ABEC-5 Bearings and Magnum or Quake wheels. It’s a great package for introductory roller skaters and provides everything you need to get started.
Super Deluxe Discovery Package
From $499.00
Description
OverviewMore InfoRondòVariant MComplete OutfitsCustom Shaping
Overview
Soft-Mid Strong Roller Construction 35
Boot: Rondò (Ivory or Black)
Skate Frame: Roll-Line Variant M
Wheels: Roll-Line Magnum 57mm (53D or 57D) or Crazy Skates Indoor/Outdoor wheels quake 88a 63mm
Bearings: 7mm ABEC-5
Toe Stops: Roll-Line Standard Gray (Metric Threads)
Mount: Custom Skates US (Power Wedge Included)
Type of Skating: Beginning Competition Roller Figures
Training Level: Entry to Mid Level Figure Skaters
Training Hours: 7 to 15 Hours per week
Comfort Level: Very Comfortable Competitive Level Skate, Feels like a Traditional Skate
Please reference the Chart for plates and laces sizes.
- This is a complete skate package – NO customer substitutions.
- Skates US may substitute products of equal or higher value at no additional charge.
- Packages are Custom Mounted and Assembled after the order is placed. Please allow for this time.
- Roll-Line Plate (Frame) Sizes are dependent on the Boot Size.
- If your boot size allows an option of frame size, please indicate your choice in the order notes on the checkout page. Longer plates are better for FreeStyle, shorter plates are better for Figure and Dance.
- Please determine the Boot Size FIRST.
- Be SURE of your SIZE before ordering!
- Please note that Packages, once MOUNTED, are considered final and are not returnable.
- These special Packages are NOT a part of the Skates US “Boot Sizing Program”
Performance
Control and Stability
The unique insole made with fiberglass and nylon allows more power transmission and increases the stability.
It also allows for the thickness of the sole to be reduced thus lowering the center of gravity and giving the skater even greater control, stability.
The unique heel design adds further stability to the boot. The curve on the heel increases weight distribution, allowing the heel to be in contact with over half the insole giving the skater a sense of oneness with the floor.
The heel and the sole are positioned in perfect horizontal alignment so they are fully supported by the flat plate allowing the natural alignment of the metatarsus-phalanx. This allows the plantar-flexor muscles to remain at their optimum length allowing the muscles to react more rapidly ensuring better balance and control.Lacing
Uses the same lacing system as the top models allowing for greater accuracy and feel in lacing.
Rondò also has EDEA’s patented hooks and hook position meaning the laces can hold the boots without the need to strangle the leg.Comfort
Ventilation
Hi-tech soles are fully ventilated allowing the foot to cool and helping the lining to dry more quickly so discouraging bacteria, preventing allergies and reducing odor.
Wiggle Room
Because of the thinner sole, EDEA boots have a lower profile. This means we’ve been able to add an extra couple of millimeters of room for the toes for added comfort while retaining a lower profile.
Padded
The Rondò is padded with EDEA’s top of the line microfiber fabric offering comfort and support. There is additional padding at the ankle for comfort and to hold the heel in place more firmly giving a better foot position.Anatomical
All EDEA skates are designed around the foot with curves and strength to hold the heel in place, to support the foot and give the best fit and maximum comfort. The Rondò is more shaped and stiffer ensuring the heel sits more firmly in its pocket giving increased comfort and better control.
Tongue
The tongue is key in any boot. In the Rondò the tongue gives the increased support required by skaters at this level. Its anatomical shape helps the leg bend in jumps while additional padding increases the comfort.Easy Care
Latest Technology for Frame Mounting
The combination of the new Hi-tech sole, new planer concept and the specially designed hi-low (double helix) screws allows a new way quicker, less fiddly more accurate way to mount frames.
Designed and Made in Italy
Everything at EDEA is done at their factory in a little village at the foot of the Alps. This means they have full control over control design, quality and production. You buy EDEA boots knowing they’ve been cared for from the drawing board until they are placed in the box to be sent to the shops.
Rondò Tech Specs
The EDEA RONDO Intro Competitive FreeStyle and Dance Skate is the best Skating Boot for Lower-Level Dance and FreeStyle Skaters. The RONDO can also possibly be used for Figures (Large Circles and Loops) ONLY, but is not suggested to use for Dance and FreeStyle at the same time. Possibly after using the RONDO for Figures for a year or two, then use them for Dance and FreeStyle.
The EDEA RONDO Intro Competitive FreeStyle and Dance Skate is Ultra Light and Mid-Strong Roller Construction with Beautiful Leather finish outside and perforated MicroFibre Lining and Planar Footbed. The RONDO is made with Revolutionary NEW Ultra Lightweight Materials which means that the RONDO is 25% to 45% lighter than comparable Skating Boots. Available from SkatesUS.com, the RONDO is designed for High Performance Roller Large Figures and Loops and Mid-Level FreeStyle and DanceRoller Skating and is incredibly comfortable.
The MicroPerforated MicroFibre Lining is long lasting and ventilates the perspiration quickly. The Anatomically Shaped Padding of Memory Foam (like on your mattress) and Formed fit of the boot is shaped by the Thermoformable Structure and provides the best in foot contact and control while giving the movement range to allow Great Performances. Other features are the comfortable Back Cuff Padding, the Rounded Heel Shape which more evenly distributes the weight and adds torsional stability, the Full Wrapped Padding, the Shaped Extra Padded Tongue and the Sewn in strong forged long Hooks. The Footbed has direct Ventilation and is torsionally rigid but with just a bit of vertical compression in the Ball of the foot, that creates a lower center of gravity in the Skate, that creates a lower displacement which greatly increasing stability and control.
The EDEA RONDO Intro Competitive FreeStyle and Dance Skate now has a very strong and supported PLANAR Sole, which is Flat and Ventilated to match the mounting surface of the Skate Frames. With these new materials, it is now possible to properly mount the Skate Frames to the Skating Boots. Be sure to use the enclosed EDEA “Double Helix” special EDEA screws (with a High thread that cuts and a Low Thread that grips). This system can be confidently used for most Competitive Roller Skaters, but if you are a heavy duty FreeStyle Skater, it would still be suggested to use a Bolt Mount.
For a very detailed Technology White Paper on the differences between EDEA Skates and traditional Leather Skates, please take a little time and read “Why EDEA Skates are so Special“ from the Learning Center of SkatesUS.com.
In most cases the Break-In period is just a few hours, not days, weeks, or Months, but the most important Features are how LIGHT and COMFORTABLE The EDEA RITMO Semi Professional FreeStyle and Dance Skate is.
The Sizing of EDEA Skates is very consistent for each size and between models. Frame sizing for Roller Skates to EDEASkates should be completed with much care. In Roller Skating different types of Skating require very different positions of the front axle in relation to the ball of the foot. When Mounting EDEA Skates, please follow the correct Roller Frame Mounting procedures for all EDEA Skates. SkatesUS.com is the number one expert at mounting the High Performance Roll-Line Roller Frame of your choice. The Sizing and Mounting information is in the Learning Center on SkatesUS.com.
EDEA Skates fit a great majority of Skaters (because of the newly designed shoe lasts), right out of the box, but some have need of special accommodations to give that perfect fit. EDEA Skates ALL have a Thermoformable Structure which allows manipulation of the boot to give the perfect Custom fit without the Custom price . EDEA Skates use a special Memory Foam (like on your matress) and DO NOT use gel packs or standard foam that are heated in an oven, then the foot inserted to shape the inside padding of the boot only, this method allows change and movement of the old style padding over time, which is not a good thing. EDEA Skates DO use very high tech materials (similar to a carbon fiber or Kevlar material) which can be shaped using high power hair dryers and Special Shoe Lasts, in very specific locations or general widening or narrowing of the Skating Boot. This “Shaping” is actually changing the Structural Shape of the Skate. Once the boot is “Shaped”, it will stay in that shape, until the “Shaping” process is changed again. SkatesUS.com provides this very special Custom Fitting service.
Variant M Tech Specs
The Roll-Line Variant M (Metal Trucks) is for the beginning Competitive Skater in their Learning Stages and provides the same level of articulated performance as all of the upper level Roll-Line frames, but at a very affordable price. TheVariant M from SkatesUS.com provides great performance due to its innovative design and lightweight structure. TheRoll-Line Variant M is forged from a solid bar of Aircraft Aluminum Alloy and completely CNC machined. The Roll-LineMechanism Action adjustment system provides accurate Action adjustments using the 04 series, 13mm base King Pins with Adjustment Nuts and Locking Screws. The Variant M features Metal Trucks with the strongest Steel Axles available with adjustable Pivot Pins. The design and materials of Roll-Line Skates from SkatesUS.com, provides athletes the proper support of the skating shoe and give the most sensitive control, the greatest and absolute fastest response available from any skate, providing a sense of great stability and action.
Roll-Line Natural Rubber Suspensions provide quick and fluid energy transmission from the foot through the skate to the skating surface.
The Roll-Line Natural Rubber Suspensions are available in three hardnesses to provide the perfect skate alignment. The Upper (Large) Suspension provides the Stability of the Edge, while the Lower (Small) Suspension creates the Deep Edges, Great Turns and Spins. The Suspensions can be mixed and matched to provide a VERY Custom skate Action. Usually the Upper (Large) Suspension is harder, because it is carrying the weight of the Skater, and provides the edge stability, while the Lower (Small) Suspension is one or (more infrequently) two levels more flexible, providing great edges and changes.
Green = Flexible
Natural (Brown) = Medium
Yellow = Hard
The Variant M is provided with the Standard (Gray) Toe Stops (Metric).
Some of the newer versions of the Variant, may have a machined Slot in the base of the frame. This is an “In Production” upgrade that is being phased into producltion, and may not be on all and the smaller sizes. The purpose is to reduce weight, without reducing strength.
Complete EDEA Skate Outfits
SkatesUS.com is providing the opportunity to have a completed EDEA Skate Outfit including the top Roller Skate Frames appropriately used at this level. All of these Custom High Level EDEA Skate Outfits will take about one week, as not all of the Roller Skate Frames are always in stock. It is highly recommended to use this time make sure that the fit of the EDEA Skate is proper prior to any Mounting of the Blade or “Shaping” of the Boot.
When the EDEA Skate Outfit is paid for, SkatesUS.com will ship the EDEA Skates to verify the correct size and then we will cover the cost of the return shipping after trying on the EDEA Skates prior to mounting the Roller Skate Frames and complete the very high level, high performance EDEA Skate Outfit. For more details on this service see the SkatesUS.com Boot Sizing Policy (which is only valid in the United States). Once the Roller Skate Frames are Mounted or the Boot is “Shaped”, the Skates are no longer considered New and CANNOT be Returned. We highly recommend confirming correct size before ordering the items to be mounted. All International orders are final, once paid for and shipped.
Custom Shaping Services
SkatesUS.com will help with any Custom Shaping Services, as needed. There may be labor charges for the Custom Shaping Services. Some of our Dealers are also trained in the Shaping process and can do an excellent job locally.
Remember with EDEA Skates, the Carbon Fibre type material is not like leather and will not just change shape on its own. If something pressures, it will always pressure, until it is adjusted and then once the Skate is adjusted, it will not pressure and will stay that way unless it is changed again. When we are “Shaping” the Skate, we are “Shaping” the shell or structure of the Skate. Once it hardens into the new shape, it will stay that way until changed again.
The best way for us to work on the Skates, is of course to have the Skaters feet to put into the Skates and find out where the pressure points are.
If that is not possible, please trace the foot on a piece of paper and mail (yes, snail mail) or put good measurements on the drawings in mm or inches. When a drawing is scanned or faxed, it is scaled and makes a good reference, but is not accurate for measurements. The second part of this is to take some digital pictures of the feet and E-Mail them to OrderDesk@SkatesUS.com and to Info@SkatesUS.com. Pictures will help us to visualize the issues, but the drawings with measurements are essential.
Related products
-
EDEA 4 Set Roller Wheel Case
From $45.00 -
MATRIX (Steel) Skate Frames
From $529.00 -
EDEA Skate Insoles – Standard LATEX
From $10.00 -
EDEA Skate Laces
From $8.00