SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels – Discontinued



figure_2 SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels - Discontinued dance_5 SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels - Discontinued freestyle_2 SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels - Discontinued
derby_5 SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels - Discontinued recreational_5 SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels - Discontinued jam_4 SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels - Discontinued
rhythm_5 SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels - Discontinued quadhockey_3 SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels - Discontinued quadspeed_2 SUPER SPEED RACE 63mm Pro Ultra-Roll Wheels - Discontinued

Please Call or E-Mail to confirm availability prior to ORDERING

Update:  as of February 2020, we only have 88A hardness available.  All others sold out.

SUPER SPEED RACE 85A, 88A, 90A, and 95A Professional Ultra-Roll Wheels
Part Number:  STRUSSR85, STRUSSR88, STRUSSR90, and STRUSSR95
Hardness:  Rose Hub = 85A, White Hub = 88A,
White Hub = 90A, White Hub = 95A
Diameter:  63mm
Tread Width: a very Narrow 20mm
Compound:  Cast Urethane BiCompound Formula
Hub Info:  Large Hub, Outside is Silver Chromed

The SUPER SPEED RACE Wheels are probably the BEST ROLLING Wheels available today. Roll-Line has reinvented the wheel giving it properties that are normally not achievable in one wheel, Very Tight Grip and Super Roll. Roll-Line based the design on that of the Low Rider Tire concept. Large Hub and a Smaller, Thinner Tread, and produced one of the LIGHTEST, TIGHTEST, and BEST ROLLING wheels available. Roll-Line has developed the Delrin Hub which is incredibly Strong, very Light, and with extremely Close Tolerances for Roundness, Trueness, and for the Cage where the Bearings and Spacers are mounted. The Roll-Line Tread is a Cast Urethane BiCompound Formula, which provides Tight Grip, without the tire compression that is normally associated with a wheel of this caliber.  The lack of tire compression, along with the thinner, narrower tread, mounted on the Roll-Line Hub, is what provides the INCREDIBLE ROLL. The  SUPER SPEED RACE 85A, 88A, and 90A provide that extra grip for rather slippery surfaces, and the 95A Wheels are for skating surfaces a more standard range of grip.  The outside face of the Hubs on  SUPER SPEED RACE are Silver Chromed.

In the USA, most popular Wheels which are used by most Skaters, are the  SUPER SPEED RACE 95A (which is similar to others 101A in grip, but with much more ROLL), while the GREASE 85A, 88A, and 90A are used for the ability to press those Strong Edges on Skating Surfaces that are a bit less than tight.  The 97A (which is similar to others 103A in grip, but with more ROLL), is best used on high level competitive Skating Surfaces that are a bit more Tight to provide that incredible ROLL.

The softer the wheel, or lower Shore “A” hardness number, the more the grip and slightly less roll. The harder the wheel, or higher Shore “A” number, the more the roll, with slightly less grip.

It is almost always recommended to use spacers in the wheels, when using standard 7mm bearings. Long ago, before the use of Lock Nuts (the nuts that have the Nylon Plastic inserts) to hold the wheels on the axles, Jam Nuts were used, but when the spacer was not as wide as the web of the wheel, or the wheel was not machined accurately, the bearings would lock up, the nut had to be tight, and could not be “backed-off”. This method, of locking the Axle Nut down, did promote proper bearing alignment and did increase the diameter of the axle from 7mm to approximately 14mm, because everything was locked down, which also saved the problems of bent axles. Today we do use Lock Nuts. It is still very advisable to lock everything down (especially for FreeStyle, Jam, and Roller Derby Skaters). Roll-Line does provide Spacers for Roll-Line Wheels with each pair of Frames or they can be purchased separately. Properly locking the Wheels down when using standard bearing types, will also promote longer bearing life.

The Roll-Line 7mm SpeedRace & SpeedMax Bearings , are specifically made for very High Level Competitive FreeStyle Roller Skating and are a very Durable Bearing with lots of ROLL. The SpeedRace & SpeedMax  Bearings are Free Rolling with minimal Radial Play which promotes and very evenly distributes the load across the 7 or 8 (of the SpeedMax) balls for optimal Roll and a good amount of Axial Play or Thrust, which is the side movement of the inner race in relation to the outer race. This movement is very important because when Skaters push, we always put side load on the skate to get power in the push or stroke. If the Bearing does not allow for this, it will bind and LOOSE operating speed or ROLL. These provisions in the Race Curvature and Contact Angle allow the Roll-Line SpeedRace & SpeedMax Bearings to ROLL very freely 

The Roll-Line SpeedRace Bearings have 7 balls and a rubber sealant Shield and the SpeedMax have 8 balls and a metal Shield and are ONLY available for 7mm Axles. The Roll-Line SpeedRace & SpeedMax Bearings are skated on by most of the World level FreeStyle Skaters and Champions.

When ordering Sets of Wheels from, directly via E-Mail ( or by phone (765) 935-7477, multiple HARDNESSES of the SAME Type and Size Wheels may be mixed.  In most cases, the GREASE Wheels are rarely used in mixed sets, as these types of Skating tend to utilize all of the edges as pivots and still the extreme long roll is desired.  We are unable to do this with online orders or when at Special Events and Competitions, please contact us directly, and our Dealers may not offer this service.
Please Call or E-Mail to confirm availability prior to ORDERING