Soft-Mid Stiff Construction 40
Ladies Sizes (Ivory): 185 through 280 in 5mm increments
Please reference the Sizing Chart for conversion from US and Euro sizes.
Type of Skating: Beginning Amateur Level for Serious Beginners and Adult Skaters who prefer a stiffer construction Skate
Be ready to stand in the spotlight! Our new 3D-textured material paves the way for the next generation. Keep the same features you love about Edea like durability, memory foam comfort, water repellent, and lightweight properties PLUS the sleek, modern look of the golden sole and white heel of the Piano (a champion favorite)!
Featuring four hooks instead of the traditional three, you will discover just how much quicker you can get to the ice. Lace up, skate, unlace and done! It’s that easy! Just remember to loosen the laces all the way down to the toe to maintain a comfortable width!
The unique EDEA Footbed is torsionally rigid but with just a bit of vertical compression, that creates a lower center of gravity in the Skate, creating a lower displacement which greatly increases stability and control. The Footbed and bottom cover will not absorb moisture and WILL Securely hold the special EDEA screws, used to mount the Ice Blades. For a very detailed Technology White Paper on the differences between EDEA Skates and traditional Leather Skates, please take a little time and read “Why EDEA Skates are so Special“ from the Learning Center of SkatesUS.com.
In most cases the Break-In period is just a few hours, not days, weeks, or Months, but the most important Features are how LIGHT and COMFORTABLE the EDEA Wave is!
The heel pocket firmly holds and locks the heel in place, giving you more control and power, optimally obtained with the correct lacing of the boot. We have made lacing easier with the addition of a fourth hook under the point of flexion. This hook is set at a slightly different angle with the purpose of following the natural line of the foot. Sense a snugger fit at the instep and around your entire foot.
Notice the windows encompassing the hooks. The extra depth around the hook that the windows provide allow the laces to easily wrap around the hook and lock.
The hooks are set so they are sunken in to help avoid possible snags between them. Having the hooks set into the windows allows the boot to be much more adherent to the foot in order to provide a more secure fit.
The embedded hooks are made of hardened and forged carbon steel, and are therefore extremely robust and resistant.
Closed and locked in. Feel the difference.
Complete EDEA Skate Outfits
SkatesUS.com is providing the opportunity to have a completed EDEA Skate Outfit including the top Ice Blades appropriately used at this level. All of these Custom High Level EDEA Skate Outfits will take about one week, as not all of the Blades are kept in stock. It is highly recommended to use this time make sure that the fit of the EDEA Skate is proper prior to any Mounting of the Blade or “Shaping” of the Boot.
When the EDEA Skate Outfit is paid for, SkatesUS.com will ship the EDEA Skates to verify the correct size and then we will cover the cost of the return shipping after trying on the EDEA Skates prior to mounting the Blades and complete the very high level, high performance EDEA Skate Outfit. For more details on this service see the SkatesUS.com Boot Sizing Policy (which is only valid in the United States). The MOTIVO Skate Packages will be completely Mounted for ease of getting started. Once the Blade is Mounted or the Boot is “Shaped,” the Skates are no longer considered New and CANNOT be Returned. All International orders are final, once paid for and shipped.
The EDEA Skate Complete Outfit is only returnable if the items are in new, unused condition, meaning they have not been shaped or mounted prior to return. We highly recommend confirming correct size before ordering the items to be mounted.
Custom Shaping Services
SkatesUS.com will help with any Custom Shaping Services, as needed. There may be labor charges for the Custom Shaping Services. Some of our Dealers are also trained in the Shaping process and can do an excellent job locally.
Remember with EDEA Skates, the Carbon Fibre type material is not like leather and will not just change shape on its own. If something pressures, it will always pressure, until it is adjusted and then once the Skate is adjusted, it will not pressure and will stay that way unless it is changed again. When we are “Shaping” the Skate, we are “Shaping” the shell or structure of the Skate. Once it hardens into the new shape, it will stay that way until changed again.
The best way for us to work on the Skates, is of course to have the Skater’s feet to put into the Skates and find out where the pressure points are.
If that is not possible, please trace the foot on a piece of paper and mail (yes, snail mail) or put good measurements on the drawings in mm or inches. When a drawing is scanned or faxed, it is scaled and makes a good reference, but is not accurate for measurements. The second part of this is to take some digital pictures of the feet and E-Mail them to OrderDesk@SkatesUS.com and to Info@SkatesUS.com. Pictures will help us to visualize the issues, but the drawings with measurements are essential. Please do not put your feet in the Boots and then heat them. This process will be too hot for your feet.
Temporary Mounting Services
SkatesUS.com is also providing (if selected) the custom Mounting Services to complete your very high level, high performance EDEA Skate Outfit. We will complete a Temporary Mount by properly installing the Screws in the Blade Slots, based on the normal Center of Balance.
Once you have received your Skates and work with your Coach to ensure proper positioning of the Blade for your body and build. Adjustments can be made by slightly loosening the screws and sliding the Blade on the slots, as needed. Once the Blade positioning is completed and tightened, it is time to install ALL of the remaining Flat Head (CounterSunk) Special EDEA Screws. These screws are installed by using the INCLUDED 2.0mm (5/64″) Drill Bit Extender. By using the Drill Bit Extender, the additional screws can be installed without removing the Blade or danger of hitting the drill chuck on the Blade.
The EDEA Skates Nylon Fibreglass Composite FootBed will hold the Special EDEA flat tipped, high-low thread Screws with several times the foot-pound torque than that of a standard sheet metal screw into a leather and cork sole of a traditional leather boot. The EDEA Skate does not require any additional water-proofing and the rubber coated FootBed of the EDEA Skates will not get water logged and allow the screws to loosen and fall out. EDEA Skates are much safer due to these innovations.
The easy steps to complete the mount are:
1. Remove the InnerSole.
2. With the INCLUDED 2.0mm (5/64′) Drill Bit Extender, drill the center pilot hole in the Center of each of the Countersink screw locations.
3. In the Sole of the Skate Drill ALL the way through the Sole.
4. in the Heel of the Skate Drill to the Void in the Heel.
5. Install the appropriate Special EDEA flat head Screws into the holes with a #2 Phillips Screw Driver.
6. With a straight blade Screw Driver or chisel, on the inside FootBed of the Skate, remove the drill trails (shavings).
7. Re-Install the InnerSole.
8. Put the Skates back on.
9. Enjoy Skating in EDEA Skates!!!